ALLIANCE SWT421, Programming Manual

Page: 75 / 75

36198
73
Section XIV
Default Washer Settings
Default Settings Default Cycle
The cycle listed is the default cycle programmed in at
the factory. This cycle can be made longer or shorter
by setting the fills, rinses and spins at different
variables. Refer to the Programming section to change
these times.
The above default settings are recommended for long
washer cycles. The recommended short cycle settings
are also listed.
Cycle PERM PRESS
Wash Water Temperature WARM
Rinse Water Temperature COLD
Special Vends OFF. All items zero.
Signals:
Keypress
End of Cycle
Unbalance
Coin Drop ON (at low volume)
OFF
OFF
OFF
Coin Value .25
Power Fail Reset OFF/5 minutes
Control Configuration:
Daylight Savings
Wash Temp Indicator
Infra-red Access
Decimal Point
Auto Collect
ON
ON
ON
ON
ON
Cycle Default
Short
Cycle
Setting
Water Fill Variable - WARM
Agitate 10:00 7:00
Pause 0:10
Pump 0:00
Spin 1:30
Spin/Spray 0:30
Spin 1:30
Extra Rinse Fill Variable - OFF
Extra Rinse Agitate 0:00
Extra Rinse Pause 0:00
Extra Rinse Pump 0:00
Extra Rinse Spin 0:00
Rinse Fill Variable - COLD
Rinse Agitate 4:00 2:00
Pause 0:10
Pump 0:00
Spin (Add to final
spin time) 1:30
Final Spin 7:00 5:00