ALLIANCE SWT421, Programming Manual

Page: 54 / 75

52
36198
Configuration Programming
Use the following chart (Chart 5) to turn on or turn off
the preprogrammed daylight savings option, wash
temperature, infra-red access option, decimal point
option and the automatic collect option in the
Electronic Control. To change any or all of these configuration options,
review the following descriptions carefully and choose
the appropriate configuration value. Enter the
appropriate value in step 6 on the previous page.
Daylight Savings This option automatically sets the clock in the Electronic Control to account for the time
change during Daylight Savings.
OFF= Turns off the automatic daylight savings option programmed in the Electronic
Control.
ON= Turns on the automatic daylight savings option programmed in the Electronic Control.
Wash Temperature This option determines if the LED lights will illuminate to show fill temperatures following
the initial wash fill. The initial wash fill LED will always light. The user has the option of
illuminating the LED for an extra rinse fill (if selected) and the final rinse fill.
OFF= Turns off the extra rinse fill and final rinse fill LED lights.
ON= Turns on the extra rinse fill and final rinse fill LED lights.
Infra-red Access This option determines if a Micro-Wand can access or program the Electronic Control.
OFF= Turns off the infra-red access by the Micro-Wand.
ON= Turns on the infra-red access by the Micro-Wand.
Decimal Point This option determines if a decimal point is used when displaying the vend price, (i.e.
machines using token currency may choose to remove the decimal point).
OFF= Turns off the decimal point from appearing in the VFD.
ON= Turns on the decimal point to appear in the VFD..
Automatic Collect This option will determine if audit information may be automatically collected by a Micro-
Wand. When programming the cycle parameters in the washer control with the Micro-
Wand, the Micro-Wand will automatically collect the audit information if the Automatic
Collect is turned ON. This is done so the audit information will remain accurate even with
vend price changes. If Automatic Collect is turned OFF, the Micro-Wand user will not
access private audit information when programming the washer.
OFF= Turns off the ability of the Micro-Wand to collect audit information.
ON= Turns on the Micro-Wand to automatically collect audit information.