ALLIANCE SWT421, Programming Manual

Page: 61 / 75

36198
59
31. Set Real Time Clock Year “CYr”
This option allows the user to set the Electronic
Control’s internal clock to the correct year.
How to Program the Clock Year
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 94.
3. Press the DELICATES (+) pad or the COLD (-)
pad to scroll through the programmable options
until
“CYr”
appears in the VFD. See Figure 95.
4. When
“CYr”
appears in the VFD, press the PERM
PRESS pad. The current year will appear in the
VFD.
5. Press the DELICATES (+) or the COLD (-) keypad
to increase or decrease the year until correct. See
Figure 96.
6. Press the PERM PRESS (enter) keypad when the
correct year appears in the VFD.
“CYr”
will appear
in the VFD.
NOTE: To program other options, refer to the
appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand; press the COLD keypad
with the other hand. The control will revert back to
the “Ready” mode. See Figure 2.
Figure 94
Figure 95
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C136IE1A
Figure 96
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A