ALLIANCE SWT421, Programming Manual

Page: 60 / 75

58
36198
30. Set Real Time Clock Month “COn”
This option allows the user to set the Electronic
Control’s internal clock to the correct month.
How to Program the Clock Month
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 91.
3. Press the DELICATES (+) pad or the COLD (-)
pad to scroll through the programmable options
until
“COn”
appears in the VFD. See Figure 92.
4. When
“COn”
appears in the VFD, press the PERM
PRESS pad. The current month will appear in the
VFD.
5. Press the DELICATES (+) or the COLD (-) keypad
to increase or decrease the month until correct. See
Figure 93.
6. Press the PERM PRESS (enter) keypad when the
correct month appears in the VFD. The next option,
“CYr”
, will appear in the VFD.
NOTE: To program “ CYr” (Set Real Time Clock
Year), see option 31. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand; press the COLD keypad
with the other hand. The control will revert back to
the “Ready” mode. See Figure 2.
Figure 91
Figure 92
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C135IE1A
Figure 93
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A