© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
202065R6
72
How to Program Default Cycle Modifier
“CnP6” (software version “S 02” or higher
only)
This option allows the owner to set the Default Cycle
Modifier.
1. Press the DELICATES ( ) or the COLD ( )
keypad to scroll through the programmable
options until “
CnP6
” appears in the display.
2. When “
CnP6
” appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number corresponds to the
current Default Cycle Modifier. Refer to
Table 8
.
3. Press the DELICATES ( ) or the COLD ( )
keypad to increase or decrease the current
number to the desired number selected from
Table 8
.
4. Press the START (enter) keypad when the
desired number appears in the display. The next
Cycle Modifier option, “
CnP1
”, will appear in
the display.
NOTE: To program
“
CP--”
(Cycle Programming),
press the WARM (<) keypad to return to the main
programming options list and refer to
option 26
. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the WARM (<) keypad until the control returns
to Ready Mode.
>
<
>
<
“CnP6”
Default
Value
Cycle
Modifier
0
Small Load
*1
Medium or Light/Medium
2
Heavy
*Factory default setting.
Table 8
