© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
202065R6
8
Display Identification
Light Emitting Diodes (LEDs)
(Refer to
Figure 1
or
Figure 2
)
LIGHT EMITTING DIODES (LEDs) are used to
indicate the chosen cycle, wash temperature and cycle
status. See below for information on each LED.
CYCLE LED (NORMAL, PERM PRESS or
DELICATES)
CYCLE
LED will remain lit the entire cycle.
WASH TEMP LED (HOT, WARM or COLD)
WASH TEMP
LED will remain on until the end of the
cycle or will change to a rinse temperature if programmed
to do so.
WASH LED
WASH
LED
is lit at the beginning of the wash portion
of the cycle and will remain lit until the wash is
complete.
RINSE LED
RINSE
LED is lit at the beginning of the Rinse or
Extra Rinse portion of the cycle and will remain lit
until the rinse is complete.
SPIN LED
SPIN
LED
is lit during the final spin portion of the
cycle.
INSERT COINS/CARD LED
INSERT COINS/CARD
LED
prompts the user for
coins or a card to satisfy the vend price. Four digits
show the vend price remaining to be satisfied. The
vend price displayed will decrease with each coin
inserted. If new options are selected during the first fill
of the wash cycle and it requires additional vend, the
INSERT COINS/CARD
light will flash one (1) second
on and one (1) second off, and the display will show
the vend price remaining to be satisfied.
SMALL LOAD LED
SMALL LOAD
is lit if selected for the current cycle.
The small load pressure switch will be used as the fill
level.
MEDIUM or LIGHT/MEDIUM LED
MEDIUM
or
LIGHT/MEDIUM
is lit if selected for the
current cycle. The normal load pressure switch will be
used as the fill level.
HEAVY LED
HEAVY
is lit if selected for the current cycle.
Four 7-Segment Digits
The 7-SEGMENT DIGITS are used to display the
time remaining in a cycle, vend price, error messages
and descriptive codes. During diagnostic testing or
manual programming of the control, these digits will
display descriptive codes and values (as described in
Entering the Manual Mode
).
