ALLIANCE SWNLC2PP111TW01 Manual Download Page 53

Page: 53 / 104

Programming Control

202065R6

How to Program Special Vend A Start
Hour “SA02”

This option allows the owner to set the hour that

Special Vend A will begin.

1. Press the DELICATES ( ) or the COLD ( )

keypad to scroll through the programmable

Special Vend A options until “

SA02

” appears in

the display.

2. When “

SA02

” appears in the display, press the

START (enter) keypad. The current start time (in

military time) will appear in the display.

NOTE: The hours will be displayed in military

time.

3. Press the DELICATES ( ) or the COLD ( )

keypad to increase or decrease the start hour to

the desired hour.

4. Press the START (enter) keypad when the correct

hour appears in the display. The next Special Vend

A option, “

SA03

”, will appear in the display.

NOTE: To program

“SA03

” (Special Vend A Start

Minute), continue to next Special Vend A option. To

program other options, press the WARM (<)

keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the WARM (<) keypad until the control returns

to Ready Mode.

How to Program Special Vend A Start
Minute “SA03”

This option allows the owner to set the minute that

Special Vend A will begin.

1. Press the DELICATES ( ) or the COLD ( )

keypad to scroll through the programmable

Special Vend A options until “

SA03

” appears in

the display.

2. When “

SA03

” appears in the display, press the

START (enter) keypad. The current start minute

will appear in the display.

3. Press the DELICATES ( ) or the COLD ( )

keypad to increase or decrease the start minute to

the desired minute.

4. Press the START (enter) keypad when the correct

minute appears in the display. The next Special

Vend A option, “

SA04

”, will appear in the

display.

NOTE: To program

“SA04”

(Special Vend A

Length in Hours), continue to next Special Vend A

option. To program other options, press the WARM

(<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the WARM (<) keypad until the control returns

to Ready Mode.

Summary of Contents for SWNLC2PP111TW01









































































































Search results

Summary of Contents for SWNLC2PP111TW01

Reviews:

Related manuals for SWNLC2PP111TW01

Brands by name

Popular brands

ALLIANCE SWNLC2PP111TW01, Manual

Search results

Summary of Contents for SWNLC2PP111TW01

Reviews:

Related manuals for SWNLC2PP111TW01

Brands by name

Popular brands