© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
41
1300003 (EN)
8. Install new return ribbon by connecting teeth
from flap portion of new return ribbon to teeth of
bottom (non-flap) portion on old return ribbon
with pin.
NOTE: Be certain to keep return ribbon under
return ribbon guide.
9. Use manual crank to turn cylinder until new
return ribbon has completed the entire rotation of
the cylinder.
10. Remove pin from teeth of return ribbons.
11. Connect both ends of new return ribbon by
connecting teeth with pin.
12. Use manual crank to turn cylinder until correct
tension of return ribbon is complete.
13. Verify that new return ribbon is placed in
between the guide pins of output tray in front of
machine. Refer to
Figure 36
.
14. Hook the tension spring back onto the tension
pin.
15. If necessary to increase or decrease the tension of
the return ribbons, refer to
Adjustment of Return
Ribbons
section.
NOTE: The return ribbons should have enough
tension to travel along the cylinder without slipping
(including while carrying linen) but not so tight as
to become stretched out.
16. Reinstall rear panel.
17. Reinstall both side panels on the finisher.
Replacement of Supporting Rollers
To replace the supporting rollers, perform the
following steps.
1. Remove side panels.
2. Remove top panel.
3. Lift the cylinder using a jack or maintenance
crane.
4. Unscrew the blocking screws of the supporting
rollers on the bar that carries the rollers
(2 pointed screws).
5. Remove the bar and rollers.
6. Mount the bar back into place with new rollers.
7. Install the rollers in position on the bar,
maintaining proper distances.
8. Install the bar on the straight blocks.
9. Reinstall top panel.
10. Reinstall side panels.
Replacement of Side Rollers
To replace side rollers, perform the following steps.
1. Remove side panels.
2. Remove screws that hold roller in place.
3. Remove spacer from old roller.
4. Place new roller onto spacer.
5. Install new roller in place with screws removed
in step 2.
6. Reinstall side panels.
FWF31N
1
Return Ribbon
2
Guide Pin
3
Output Tray
Figure 36
1
2
3