© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
13
1300003 (EN)
IMPORTANT: The forklift arms must be inserted
all the way under the center of the skid to avoid
toppling the machine.
3. Use the forklift to carefully lift the packaged
finisher. Refer to
Figure 4.
IMPORTANT: DO NOT lift the unit more than
8 inches (203 mm) off the ground.
4. Move the packaged unit as close as possible to
the area where the finisher will be installed.
Follow the procedures in
Moving the Finisher
with Rollers
section.
IMPORTANT: To prevent damage to finisher DO
NOT turn the finisher over or let it drop when
handling.
Moving the Finisher with Rollers
At least three people and three 3.5 inch (89 mm) to
4 inch (102 mm) rollers or pipes are required to move
the finisher from the skid to its final location according
to the following procedures.
IMPORTANT: At least three people are required to
move the finisher. Proper lifting and handling
procedures must be followed to avoid damage to
the finisher.
1. Follow the procedures in
Pre-Installation
Inspection
section.
2. Remove the protective packing material.
3. Use a pry bar to remove the wood stops from the
skid. Refer to
Figure 5
.
4. Remove the four shipping bolts from the bottom
of the finisher on the inside of the side panels
where they attach to the skid.
5. Place two rollers on the ground next to the
finisher. Refer to
Figure 6.
6. Place the third roller on the ground ahead of the
first two rollers and past the end of the finisher.
FWF10N
Figure 3
FWF14N
Figure 4
FWF14N
8"
8 in.
(203 mm)
FWF13N
Figure 5