© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1300003 (EN)
10
Installation
Pre-Installation Inspection
Upon delivery, visually inspect the packaging and
portions of the finisher that are visible through the
packaging for shipping damage.
If the package or finisher is damaged or if signs of
possible damage are evident, have the carrier note the
condition on the shipping papers before the shipping
receipt is signed, or advise the carrier of the condition
as soon as it is discovered.
IMPORTANT: Lift the box cover off the finisher
and check the items listed on the packing list.
Advise the carrier of any damaged or missing articles
as soon as possible. A written claim should be filed
with the carrier immediately if articles are damaged or
missing.
IMPORTANT: Warranty is void unless the finisher
is installed according to instructions in this manual.
Installation should comply with minimum
specifications and requirements detailed in this
manual and applicable local gas fitting regulations,
municipal building codes, water supply regulations,
electrical wiring regulations, and any other
relevant statutory regulations. Due to varied
requirements, applicable local codes should be
thoroughly understood and all pre-installation
arranged accordingly.
It is strongly recommended that the purchaser be
present during installation and the first tests.
The finisher must be installed in accordance with local
and national regulations and in a well ventilated room.
Refer to following sections for proper installation
procedures.
To prevent fire, explosion, or personal
injury, this finisher may only be installed,
adjusted, and started up by a team of
qualified technicians.
W543
WARNING