Alliance Laundry Systems HWNLE2SP111CW01, Troubleshooting Manual

Page: 32 / 58

30
202202
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
General Troubleshooting
(6) Rotate spring clockwise, 40 to 60 degrees,
until it is free from right tabs. Refer to
Figure 6 .
(7) Use screwdriver to remove spring from
center tab. Refer to Figure 6 .
(8) Lift spring, with attached clip, off drop.
(9) Remove clip from spring. Refer to
Figure 7 .
(10) Attach clip to new tension spring, Part No.
209/00598/02.
(11) Place clip, installed on spring, in slot on
coin drop. Refer to Figure 8 .
(12) Use a small flathead screwdriver to push
spring under center tab. Refer to Figure 9 .
(13) Lift spring gently to place in position under
left tab.
(14) Push spring to right until it snaps into
position. Refer to Figure 5 .
(15) Close coin drop cover.
(16) Move tension spring over cover catch.
Refer to Figure 4 .
Reinstall Coin Drop Into Machine
(1) Reinstall coin drop into machine.
(2) Reconnect electrical power to machine and
drop.
(3) Add a coin to drop to verify that coin drop
is operating properly and that electrical
connection is working properly.
Figure 6
Figure 7
Figure 8
MIX 3 B
Tabs
Center Tab
MIX4B
Clip
MIX 8 B
Slot
Figure 9
MIX5B
Small Flat
Screwdriver
Center
Tab
Left Tab