allen TRTP275 Operations & Parts Manual Download Page 78

Page: 78 / 170

275 - 09/2018

Page 78

SECTION 4

PARTS

This section contains the illustrated drawings and parts list for help in identifying and/or ordering re-

placement parts for your machine. Follow the instructions in the front section of this manual “Ordering

Parts” when ordering replacement parts to insure prompt and accurate delivery.

The FRONT and/or REAR orientations are defined from the operator’s view of sitting on machine

(SOM).

All set screws have blue (LOC-TITE™) applied at the

factory. If set screw is removed or loosened for any

reason re-apply blue (LOC-TITE™).

All grease fittings are capped with CAP PLUG GC-5

(AEC PN 015692) to protect the fitting. If cap becomes

missing or damaged replace it as soon as possible.

Anti-Seize is applied at the factory to drive line couplings,

and moving components. If these parts are disassembled

re-apply a light coat of a graphite based anti-seize.

Factory Service Information

Summary of Contents for TRTP275











































































































































































Search results

Summary of Contents for TRTP275

Reviews:

allen TRTP275, Operations & Parts Manual, Page: 78 / 170

Search results

Summary of Contents for TRTP275

Reviews: