allen TRTP275, Operations & Parts Manual, Page: 36 / 170

275 - 09/2018 Page 36
SECTION 1
SAFETY
Operational Safety
Before starting up and during operation of the paver, the operator must make sure that there are no persons in the “danger
zone”. He must give a warning signal whenever a situation presenting danger to persons might develop. He must imme -
diately stop work if any person, although asked, does not leave the danger zone. All persons that are in the vicinity of the
paver must be informed of the dangers that can result from the operation of the paver.
Only mount or dis-mount the machine while the machine is stationary. Use the handles and retaining fixtures provided.
The operator must look in the direction of travel and must always have a clear view of the route ahead. Especially when
operating in the reverse direction, he must ensure that his path and the working area are clear.
Do not attempt to operate the paver unless fully trained in the machine operation, only authorized personnel should operate
the paver. All instructions provided in this manual and on the machine operating and warning decals must be followed to
prevent damage to the equipment and/or injury to operating personnel.
Check paver for proper functioning of controls before operating. Observe all gauges and instruments, and correct any mal -
functions before operating.
Do not attempt to loosen or disconnect any hydraulic lines, hoses or fittings without first relieving hydraulic circuit pressure.
Also, be careful not to touch any hydraulic components that have been in recent operation, because they can be extremely
hot and can cause burns.
Always wear personal protective equipment (PPE) appropriate for the job and working conditions. Hard hats, safety glasses,
protective shoes, gloves, reflective vests, respirators and ear protection are examples of types of equipment that may be
required. Do not wear loose-fitting clothing, long hair, jewelry or loose personal items while operating or servicing the paver.
Always check the job site for obstructions and bystanders.
Always perform a daily inspection of the paver before using it. Look for damage, loose or missing parts, leaks, etc.
Walk around the paver and warn all nearby personnel before starting the paver.
Danger Zone
Operator