Allen-Bradley 2715-15CA, User Manual

Page: 47 / 106

Rockwell Automation Publication 2715-UM001A-EN-P - July 2015 47
Configure Terminal Settings Chapter 3
Settings Menu You can access configuration parameters and system-wide information for the
terminal from the Navigation menu.
To open the Settings menu, follow these steps.
1.
Press the navigation button on the terminal.
2.
Tap Settings, or tab to the menu item and press Enter.
Item Menu Topic Tasks That You Can Perform
1 Network • Configure a static or dynamic device IP address
• Configure Ethernet Link 1 and Ethernet Link 2 settings
• View network diagnostics
2 Display • Adjust the brightness of the display
• Enable or disable the screen saver
• Configure the screen saver settings
• Calibrate the touch screen
3 HMI Device • Enable or disable downloads and firmware updates
• Enter an HMI device name
• View the catalog number and current firmware revision
• View terminal diagnostic information
• Reboot the terminal
4 Date and Time • Set the date and time on the terminal
• Set the time zone on the terminal
5 Controllers • View general information for the controller
• View diagnostic information for the controller
6 Troubleshooting • Select a default or imported profile for troubleshooting
• Save the troubleshooting log to a USB drive or SD card for Rockwell Automation
technical support
1
2
3
4
5
6