manualshive.com logo in svg

Allen-Bradley 2715-15CA, User Manual

Share
Download
Allen-Bradley 2715-15CA User Manual Download Page 106

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using its products.
At 

http://www.rockwellautomation.com/support

 you can find technical and application notes, sample code, and links to 

software service packs. You can also visit our Support Center at 

https://rockwellautomation.custhelp.com/

 for software 

updates, support chats and forums, technical information, FAQs, and to sign up for product notification updates.

In addition, we offer multiple support programs for installation, configuration, and troubleshooting. For more 
information, contact your local distributor or Rockwell Automation representative, or visit

http://www.rockwellautomation.com/services/online-phone

.

Installation Assistance

If you experience a problem within the first 24 hours of installation, review the information that is contained in this 
manual. You can contact Customer Support for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to help ensure that they are fully operational when shipped from the 
manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.

Documentation Feedback 

Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this 
document, complete this form, publication 

RA-DU002

, available at 

http://www.rockwellautomation.com/literature/

.

United States or Canada

1.440.646.3434

Outside United States or Canada

Use the 

Worldwide Locator

 at 

http://www.rockwellautomation.com/rockwellautomation/support/overview.page

, or contact your local 

Rockwell Automation representative.

United States

Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain one) to your 
distributor to complete the return process.

Outside United States

Please contact your local Rockwell Automation representative for the return procedure.

Samara

tel. +7 846 273 95 85

[email protected]

Yekaterinburg

tel. +7 343 287 19 19

[email protected]

St. Petersburg

tel. +7 812 327 3752

[email protected]

Moscow

tel. +7 495 641 1616

[email protected]

Helsinki

tel. +358 9 540 4940

 

info

@klinkmann.

f

i

Vilnius

tel. +370 5 215 1646

[email protected]

Riga

tel. +371 6738 1617

[email protected]

Мinsk

tel. +375 17 200 0876

[email protected]

Tallinn

tel. +372 668 4500

[email protected]

Кiev

tel. +38 044 495 33 40

[email protected]

Summary of Contents for 2715-15CA











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands