Allen-Bradley 2715-15CA, User Manual

Page: 100 / 106

100 Rockwell Automation Publication 2715-UM001A-EN-P - July 2015
Chapter 7 Troubleshooting
To restore the terminal to its default state, follow these steps.
1.
Cycle power to the terminal.
The Allen-Bradley logo displays during startup.
2.
Wait a few seconds, and then touch the Allen-Bradley logo when the
copyright line becomes brighter.
Copyright ©2015 Rockwell Automation
The normal startup is suspended so the restore procedure can initiate.
You are asked if you want to restore the terminal to its defaults.
3.
Tap Yes to continue, or Cancel to resume a normal startup.
You are asked to confirm the removal of all user files such as applications.
4.
Tap Yes to continue, or Cancel to resume a normal startup.
Progress messages appear on the screen during the restore operation.
When the restore is complete, the terminal performs a normal startup.
5.
From the Settings menu, update the terminal network settings.
6.
Download an application to the terminal by using the View Designer
application.
7.
From the Settings menu, update any remaining terminal settings as
appropriate.
Refer to Disable Downloads to the Terminal on page 57 for details on how to
modify device configuration settings.
TIP
Wait a few seconds before you touch the logo. If you touch the logo too
soon during startup, this error text is displayed under the copyright
line.
ERROR! FEHLER! ERREUR! ERRORE!
If this error text is displayed, cycle power to the terminal and wait a
few seconds longer before you touch the logo.