- 35 -
CISA MYEVO RFID READER
DISABLING A CHANGE OR SAFE CARD
This must be done with the DOOR OPEN.
1. Hold the
Master Card
up to the RFID reader
2. Hold the
Master Card
up to the RFID reader a second time
flashing
3. Hold the
Change Card
or the
Safe Card
to be disabled up to the RFID reader
Everytimeacardoraminicardisheldup,thegreenLEDwillflashtoconfirmithasbeen
disabled. Several cards can be disabled at a time. After 10 seconds of inactivity, the yellow LED
goes off and programming mode is exited.
DISABLING ALL THE USER CARDS OR MINI USER CARDS,
THE CHANGE CARD AND THE SAFE CARD
This must be done with the DOOR OPEN.
1. Hold the
Master Card
up to the RFID reader
2. Hold the
Master Card
up to the RFID reader a second time
flashing
3. Hold the
Master Card
up to the RFID reader a third time and keep it there
for 3 seconds 5
All the
User Cards or mini User Cards
which were enabled are now disabled. This operation
also disables any
Change
or
Safe Cards
which may have been enabled.
CLOSING THE DOOR WHEN THE LOCK IS IN SEMI-AUTOMATIC MODE
In semi-automatic mode, when the door is shut only the latchbolt automatically engages, while
the deadbolts do not. In this mode, the door can also be opened with just the handle.
It is possible to completely lock the door by engaging the deadbolts as follows.
The door must be locked (latchbolt only)
Hold the User Card or mini
User Card
which is enabled to open the lock up to
the RFID reader and keep it there for at
least 3 seconds.
During this operation the yellow LED will
flash
flashing
The deadbolts engage and the door is
completely locked
3 sec.
