- 27 -
CISA MYEVO KEYPAD
OPENING THE DOOR BY ENTERING THE USER CODE IN SCRAMBLE MODE
When the User Code is entered in
scramble mode
, it can be protected from prying eyes
because it is possible to enter up to 8 random numbers before the User Code. This makes it a
lotmoredifficultforanyoneinthevicinitytomemorisetheUserCode.
N.B.: the CISA MyEVO keypad can accept up to 12 numbers, so if the User Code has 4 digits,
the user can enter up to a maximum of 8 random numbers. If the User Code has 8 digits, the
user can enter up to a maximum of 4 random numbers.
Follow these steps:
1. Press the CISA key to activate the keypad
2. Enter the code 0000 to activate the
scramble
mode
3. EntertheUserCodeprecededbyanarbitrarynumberoffigures;thetotalnumberof
figuresmustbe12orless
4. The deadbolts and latchbolt will retract and the door can be opened.
If the door is not opened in 10 seconds, it will lock again. It is not possible to deactivate or
modify this action.
If the yellow and green LEDs flash twice
before the door is opened,
it means A NEW MASTER CODE MUST BE CREATED (PAGE 25)
INCORRECT CODE
If an incorrect User Code is entered, the CISA MyEVO keypad emits an error signal
After 3 consecutive error signals, the CISA MyEVO keypad stops working for 3 minutes.
When 3 minutes have elapsed, it is possible to enter the correct User Code.
DELETING A USER CODE
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad
2. Enter the 8-digit
Master Code
3. Press 2
4. Enter the User Code to delete
5. Re-enter the User Code to delete
