- 29 -
CISA MYEVO KEYPAD
CLOSING THE DOOR WHEN THE LOCK IS IN SEMI-AUTOMATIC MODE
In semi-automatic mode, when the door is shut only the latchbolt automatically engages, while
the deadbolts do not. In this mode, the door can also be opened with just the handle.
It is possible to completely lock the door by engaging the deadbolts as follows.
The door must be locked (latchbolt only)
1. Press the CISA key 3 times.
DISABLING THE CISA MYEVO BUTTON AND ANY OTHER
DEVICE CONNECTED BY REMOTE CONTACT
This operation can be dangerous if not in possession of the key.
By disabling the button and any other device connected by remote contact, it is only possible to
open the door from the inside with the key.
From the outside, however, it is possible to open the door using the CISA MyEVO keypad, the
CISA MyEVO RFID reader
,
or the key.
DISABLING
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad
2. Enter the 8-digit
Master Code
3. Press 6
RE-ENABLING
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad
2. Enter the 8-digit
Master Code
3. Press 6
RESTORING FACTORY SET-UP
This procedure has the following consequences:
• All the User Codes are deleted
• The length of the User Code is 4 numbers
• The
Master code
goes back to the factory set code
(FACTORY MASTER CODE: 12345678)
• The lock is factory set in automatic mode
