- 26 -
CISA MYEVO KEYPAD
CREATING A NEW USER CODE
It is not possible to create a User Code which begins with
0000
or a User Code which
begins with the same sequence of numbers which the
Master Code begins with.
It is possible to store up to 30 User Codes at the same time.
ItispossibletodeleteandcreateanewUserCodeaninfinitenumberoftimes.
This must be done with the DOOR OPEN.
1. Press the CISA key to activate the keypad
2. Enter the
Master Code
of 8 digits
3. Press 1
4. Enter the User Code
5. Re-enter the User Code
OPENING THE DOOR
The door may be opened using the User Code in one of the following ways:
• Enter the User Code directly
• Enter the User Code in scramble mode
OPENING THE DOOR BY ENTERING THE USER CODE DIRECTLY
1. Press the CISA key to activate the keypad
2. Enter the User Code
3. The deadbolts and latchbolt will retract and the door can be opened.
If the door is not opened in 10 seconds, it will lock again. It is not possible to deactivate or
modify this action.
If the yellow and green LEDs flash twice
before the door is opened,
it means A NEW MASTER CODE MUST BE CREATED (PAGE 25)
