F:\C - E\ECOMAX\COAL BOILER\Instructions and Manuals\Coal Boiler Manual Rev 6.doc
Page
14
of 36
Installation Clearances
It is essential that the Coal Boiler is installed with AT LEAST the minimum
clearances to combustibles as illustrated below. If possible, it is recommended that
these dimensions are greater, to allow for better access during installation and
servicing. In particular, ensure there is sufficient room to remove the Coal Feed
Screw.
Clearances above the appliance can be any size, as long as they do not interfere with
the opening of any of the doors, or access for servicing.
A flue liner is required if the flue is closer than 600mm to a combustible surface.
Always ensure that there is sufficient provision made to disconnect the flue for the
purposes of servicing.
