ZYNQ FPGA Development Board AX7350B User Manual
7 / 46
Amazon Store: https://www.amazon.com/alinx
The PS side mounts an 8GB eMMC FLASH memory chip to store user
operating system files or other user data.
QSPI FLASH
A 256Mbit QSPI FLASH memory chip can be used as a Uboot file for
ZYNQ chips, storage of system files and user data;
PCIe x4 Interface
The standard PCIEx8 host slot is used for PCIEx4 communication, and
can be used to connect PCIEx4, x2, x1 PCIE boards for PCIE data
communication. Support the PCI Express 2.0 standard with single
channel communication, rates up to 5GBaud.
2 SFP Interface
The 2-channel high-speed transceiver of ZYNQ's GTX transceiver is
connected to the transmission and reception of two optical modules to
realize two high-speed optical fiber communication interfaces. Each
fiber optic data communication receives and transmits at speeds of up
to 10 Gb/s.
Gigabite Ethernet Interface
2-channel 10/100M/1000M Ethernet RJ45 interface for Ethernet data
exchange with computers or other network devices. The network
interface chip uses Micrel's KSZ9031 industrial grade GPHY chip, one
Ethernet is connected to the PS end of the ZYNQ chip, and one
Ethernet is connected to the PL end of the ZYNQ chip.
HDMI video output
1 channel HDMI video output interface, selected ADV7511 HDMI
encoding chip of ANALOG DEVICE, up to 1080P@60Hz output,
support 3D output.
USB2.0 HOST Interface
Extend the 4-channe USB HOST interface through the USB Hub chip
for connecting external USB slave devices, such as connecting a