5. Align the arrow on the PTZ Dome Camera
with the screw hole on the network module
base.
6. Turn the PTZ Dome Camera to the right until
both screw holes are aligned.
7. Use the screws in Screw Pack B to secure the
camera.
8. Plug the network cable. Connect the video
terminal if analog video output is required.
9. Connect the power cable and, if required, the
alarm input /output lines and microphone
cable.
Note: The power input must be 24V AC 2A or 12V DC 2A. It is not guaranteed that the
camera can operate using other voltages and a voltage beyond the specified range may
damage the equipment. As for setting of the alarm input/output and description of the circuit,
please refer to the User's Manual.
14