Other settings:
For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server
will assign these values automatically when DHCP is in "ON" status; otherwise, you
need to key in the values manually.
Note: Where no IP address is assigned from the DHCP server, the system will set the Link-Local
Address automatically.
Basic Setting > Network > Streaming (streaming Setting)
Setting of the video streaming port
(HTTP and factory default are recommended)
1. HTTP: Port 80 can pass through most firewalls. Video streams are transmitted
through HTTP Port (80 by default) to ensure passage through firewalls.
2. RTSP: Port 554 uses a fixed port (i.e. TCP) or can be defined by users to ensure
reliable data transmission. Video streams are transmitted through RTSP Port (554
by default) to avoid video fragment or mosaics due to poor transmission quality.
3. RTP: Port 50000 to 60000 are UDP ports and can be defined by users. They
provide the fastest but also most unreliable transmission service. Video streams
are transmitted through UDP Port (50000~60000 by default) to ensure the fastest
image transmission. However, video fragment or mosaics may occur due to poor
transmission quality.
設定影像串流埠口
Basic Setting > Network > PPPoE (dial-up networking setting)
PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a
high-speed wideband network using a PC and a wideband modem (such as xDSL,
Cable, Wireless modem). The user need only to equip the PC with an Ethernet card
and apply to an ISP (such as HiNet) and an ADSL provider (such as Chunghwa
Telecom) for ADSL service to roam the Internet through ordinary twisted copper
wires.
PPPoE: Point to Point Protocol over Ethernet is applicable to networking via a xDSL
or cable modem. PPPoE setting must be executed in the LAN environment for your
PC to connect to ADSL. Follow the steps below to complete the setting:
58
