Inserting Installation Procedure
1. Take the opening sample sheet out from the
accessory pack and draw a circle on the
material according to the opening sample
sheet. Use an appropriate tool to open a hole.
Note: Do not affix the camera on a ceiling made from fragile material, such as gypsum, calcium
carbonate, magnesia, PU, PVC, and glass. The thickness of the wooden plate should be at least 1.5 cm.
2. Take the Push the inserting holders out
from the accessory pack and push them into
the hole.
4. A hole of the correct size allows the inserting
holder to pass through the opening and stop at
the loop. If the opening is too small, the
holder cannot pass through; too large, the
overall beauty will be affected (gaps around
the holder).
3. Open the leg to 90° and keep it perpendicular
to the wooden plate.
17