Alienware 13 R2 Service Manual Download Page 116

Page: 116 / 118

Flashing the BIOS

You may need to flash (update) the BIOS when an update is available or when
you replace the system board. To flash the BIOS:

Turn on the computer.

Go to

www.dell.com/support

Click

Product Support

, enter the Service Tag of your computer and click

Submit

NOTE: If you do not have the Service Tag, use the auto-detect feature
or manually browse for your computer model.

Click

Drivers & downloads

Select the operating system installed on your computer.

Scroll down the page and expand

BIOS

Click

Download File

to download the latest version of the BIOS for your

computer.

Save the file and, once the download is complete, navigate to the folder
where you saved the BIOS update file.

Double-click the BIOS update file icon and follow the instructions on the
screen.

116

Summary of Contents for 13 R2























































































































Search results

Summary of Contents for 13 R2

Reviews:

Related manuals for 13 R2

Brands by name

Popular brands

Alienware 13 R2, Service Manual

Search results

Summary of Contents for 13 R2

Reviews:

Related manuals for 13 R2

Brands by name

Popular brands