Alienware 13 R2, Service Manual

Page: 101 / 118

Replacing the camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Using the alignment posts place the camera module on the display back-
cover and snap it into place.
2 Connect the camera cable to the camera module.
Post-requisites
1 Replace the display panel .
2 Replace the display bezel .
3 Replace the display assembly .
4 Follow the procedure from step 5 to step 9 in “Replacing the palm rest ”.
5 Follow the procedure from step 3 to step 7 in “Replacing the solid-state
drive ”.
6
Replace the base panel .
101