3
www.Observint.com
© 2015 Observint Technologies. All rights reserved.
Item
Name
Function
16
F1 button
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if applicable).
In Playback mode, it is used to switch between play and reverse play.
17
PTZ Control buttons
Buttons to adjust the iris, focus and zoom of a PTZ camera.
18
F2 button
Cycle through tab pages.
In synchronous playback mode, use to switch between channels.
Mouse control
A standard 3-button (left/right/scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse:
1.
Plug USB mouse into the either a front panel or backpanel USB connector of the NVR.
2.
The mouse will be automatically detected. If the mouse is not detected, the mouse may not be compatible with the NVR. Please refer
to the recommended device list from your provider.
The operation of the mouse:
Action
Effect
Right click
Live view
: Show menu.
Menu
: Exit current menu to upper level menu.
Left click
Single click
: Live view: Select channel and show the quick set menu.
Menu
: Select and enter.
Double click
: Live view: Switch between single-screen and multi-screen.
Click and drag
: PTZ control: pan, tilt and zoom.
Tamper-proof, privacy mask and motion detection: Select target area.
Digital zoom-in: Drag and select target area.
Live view
: Drag channel/time bar
Scroll wheel
Scroll up
: Live view: Previous screen.
Menu
: Previous item.
Scroll down
: Live view: Next screen.
Menu
: Next item.
Remote control
The enter key on the remote control or the front panel has the same function as a mouse left click. The IR Range of the remote control is 10
meters. The buttons on the remote control correspond with the buttons on the front panel.
2
3
1
8
9
17
7
5
6
4
11
14
15
18
16
12
13
10
Item
Name
Function
1
POWER
Power on/off the device.
2
DEV
Enables/Disables Remote Control.
3
Alphanumeric Buttons
Use for entering numerical data
4
EDIT Button
Delete characters before cursor, check the checkbox and select the ON/OFF switch, start/stop record clipping in
playback
5
A Button
Adjust focus in the PTZ Control menu, also used to switch between input methods (upper and lowercase alphabet,
symbols and numeric input).
6
REC Button
Open the manual record interface
7
PLAY Button
Playback, for direct access to playback interface.
8
INFO Button
Reserved.
9
VOIP/MON button
Switch between main and spot output. In PTZ Control mode, it is used to zoom out the image.
10
MENU button
Press the button will help you return to the Main menu (after successful login).
Press and hold the button for 5 seconds to turn off audible key beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if applicable).
11
PREV button
Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button.
12
DIRECTION/ENTER buttons
DIRECTION: These buttons are used to navigate between different fields and items in menus.
In the Playback mode, the Up and Down buttons are used to speed up and slow down recorded video. The Left and
Right button select the next and previous record files.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, they can control the movement of the PTZ camera.
ENTER: The ENTER button is used to confirm selection in any of the menu modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will advance the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto switch.
13
PTZ button
Enter the PTZ Control mode (if applicable).
In the PTZ Control mode, it is used to adjust the iris of the PTZ camera.
14
ESC button
Return to the previous menu.
Press for Arming/disarming the device in Live View mode.
15
RESERVED
Reserved for future usage.
