1
ALI-NVR7032R_SQ
4/3/15
Name
Function Description
Status Indicators
ALARM
Turns red when a sensor alarm is detected.
READY
Ready LED is normally blue, indicating that the device is functioning properly.
STATUS
Turns blue when device is controlled by an IR remote.
Turns red when controlled by a keyboard and purple when IR remote and keyboard is used at the same time.
HDD
Flashes red when data is being read from or written to HDD.
TX/RX
Flashes blue when network connection is functioning properly.
GUARD
Guard LED turns blue when the device is in armed status; at this time, an alarm is enabled when an event is
detected.
The LED turns off when the device is unarmed. The arm/disarm status can be changed by pressing and holding
on the ESC button for more than 3 seconds in live view mode.
IR Receiver
Receiver for IR remote
Front Panel Lock
You can lock or unlock the panel by the key.
Alphanumeric Buttons
Switch to the corresponding channel in Live view or PTZ Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback mode.
The light of the button is blue when the corresponding channel is recording; it is red when the channel is in network transmission
status; it is pink when the channel is recording and transmitting.
USB ports (2)
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
Composite Keys
ESC
Back to the previous menu.
Press for Arming/disarming the device in Live View mode.
REC/SHOT
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a PTZ preset by pressing Numeric button.
It is also used to turn audio on/off in the Playback mode.
PLAY/AUTO
The button is used to enter the Playback mode.
It is also used to auto scan in the PTZ Control menu.
ZOOM+
Zoom in the PTZ camera in the PTZ Control setting.
A/FOCUS+
Adjust focus in the PTZ Control menu.
It is also used to switch between input methods (upper and lowercase alphabet, symbols and numeric input).
EDIT/IRIS+
Edit text fields. When editing text fields, it will also function as a Backspace button to delete the character in
front of the cursor.
On checkbox fields, pressing the button will tick the chec kbox.
In PTZ Control mode, the button adjusts the iris of the camera.
In Playback mode, it can be used to generate video clips for backup.
Enter/exit the folder of USB device and eSATA HDD.
MAIN/SPOT/
ZOOM-
Switch between main and spot output.
In PTZ Control mode, it can be used to zoom out the image.
F1/ LIGHT
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if applicable).
In Playback mode, it is used to switch between play and reverse play.
This quick setup guide provides instructions to initially setup and use the ALI-NVR7032R network video recorder (NVR). For additional
information on the extensive capabilities of your NVR, refer to the
ALI-NVR7000R Series Embedded Network Video Recorder User
Manual
provided electronically with your system.
NVR CONTROLS, CONNECTORS AND INDICATORS
Your new security system is easy to use and easy to setup. This section includes the function and use of the components included with a NVR
system. Advanced control and configuration procedures are included in the
ALI-NVR7000R Series Embedded Network Video Recorder
User Manual
.
NVR Front Panel
Control Buttons
Composite keys
Alphanumeric
keys
IR Receiver
Status indicators
Lock
Power button
USB ports (2)
Jog Shuttle control
Front panel controls
ALI-NVR7032R Embedded Network Video Recorder Quick Setup Guide
