79
ALI-NT4002R, ALI-NT2002R Cameras User Manual
SECTION 5: ADVANCED NETWORK SETTINGS
NOTE
To upload the captured pictures to FTP server, you must enable continuous snapshot or event-triggered snapshot on Snapshot
screen.
To upload the captured pictures to FTP server, you must select
Enable Timing Snapshot
or
Event -Triggered Snapshot
on the
Setup
(tab)
| Storage | Capture - Capture Parameters
screen.
5.2 Configuring Email Settings
The Email feature is used to send an email message to up to three email address when specific events occur within the camera. The
Email menu is used to configure the sender’s email server, user name and password, and the receiver(s) email address(es). Events
that activate email alerts are configured in other menus.
The camera must be configured for Internet access to connect to your email server. Configure TCP/IP settings before configuring
your email preferences.
1. Open the Email menu. Go to:
Setup | Network | Advanced Settings | Email
.
2. Configure the following settings:
—
Sender
: The name of the email sender.
—
Sender’s Address
: The email address of the sender.
—
SMTP Server
: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
—
SMTP Port
: The SMTP port. The default TCP/IP port for SMTP is 25 (not secured). The the SSL SMTP port is 465.
—
Email Encryption
: Select either None or SSL, if it is required by the SMTP server.
—
Attached Image
: Check this box if you want to send email with an image.
Summary of Contents for ALI-NT2002R
Page 8: ...viii NOTES...
