ALIBI ALI-NT2002R, User Manual

Page: 80 / 105

72
SECTION 4: EVENT SETUP
8. Check the select box of Enable Fire Source Detection Shield.
9. Click Save .
4.3 VCA Configuration
4.3.1 Configuring Basic Settings
You can enable to display the VCA information on a stream or target information on alarm picture, and set the snapshot quality and
resolution.
1. Open the VCA Basic Settings menu. Go to: Setup | VCA | Basic Settings .
2. Check the select box to enable the
Intelligent Analysis
to view the current version for behavior analysis.
3. Check the select box of Picture Quality to set the snapshot quality and resolution.
4. Select other options as needed:
Display information includes the display on picture and display on stream:
—
Display VCA info. on Stream : The green frames will be displayed on the target if in a live view or playback.
—
Display Trajectory
: Check to enable the trajectory display. The target’s moving trajectory will be shown in the live view.
—
Target Marking Color : There will be a frame on the target. Enable this function to show the frame color of human as
orange, show the frame color of vehicle as purple.
—
Trajectory Display Duration : Duration is adjustable when you enable the trajectory display: 5s, 10s, 20s, 30s are
selectable. The system only shows the trajectory of selected duration.
—
Display Target info. on Alarm Picture : There will be a frame on the target on the uploaded alarm picture if the
select box is checked.
—
Display Rule info. on Alarm Picture : The captured target and the configured area will be framed on the alarm
picture.