71
ALI-NT4002R, ALI-NT2002R Cameras User Manual
SECTION 4: EVENT SETUP
4.2.1 Configuring Fire Source Region Shield
Fire Source Shield enables you to shield certain areas from being detected in fire source detection.
1. Open the Fire Source Detection Shield menu. Go to:
Setup | Event | Smart Event | Fire Source Region Shield
.
2. Check the select box to enable the Fire Source Region Shield.
3. Click Draw Area; click and drag the mouse in the live video window to draw the area. You can drag the corners of the red
rectangle area to change its shape and size.
4. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you set without saving them.
5. You can also edit the Fire Source Region name field.
6. Click Add to save the fire source detection shield, and it will be listed in the Fire Source Detection Shield List area. In the table,
you can:
—
Edit the name of the region.
—
Change the color of the border of the region.
—
Enable/disable the region.
7. Repeat the steps above to create additional regions. You can include up to 24 areas on the same image.
Summary of Contents for ALI-NT2002R
Page 8: ...viii NOTES...
