21
Alibi Camera Software User Manual
•
Select the
Time Zone
from the drop-down menu. In some system applications, the monitoring system (NVR, VMS) may be in
a different time zone from the camera. Select the time zone that best supports your system objectives.
Time Sync.
You can synchronize the clock in your camera either from an NTP server, by setting it manually, or synchronizing it with your
computer.
•
NTP
: Synchronizing Time by NTP Server.
a. Check the checkbox to enable the NTP function.
b. Configure the following settings:
Server Address
: IP address of NTP server.
NTP Port
: Port of NTP server.
Interval
: The time interval between the two synchronizing actions with NTP server.
NOTE
If the camera is connected to a public network, use a NTP server that has a time synchronization function, such as the server at the
National Time Center (IP address: 210.72.145.44). If the camera is set in an isolated network, NTP software can be used to establish
a NTP server for time synchronization.
•
Manual Time Sync.
: Set the camera clock manually or synchronize the clock in your PC.
a. Check the checkbox to enable the NTP function.
b. Do one of the following:
*
Enter the preferred time in the Set Time field, then click
Save
.
*
Check the
Sync. with computer time
box, then click
Save
.
NOTE
After setting the time in the camera, open the DST tab to setup the Daylight Savings Time configuration for the camera.
4.1.3 Maintenance
The Maintenance screen includes the camera-related maintenance functions. To open the Maintenance screen, go to
Setup
tab
| System | Maintenance
SECTION 4: CAMERA SETUP MENUS
Summary of Contents for ALI-IPU Series
Page 4: ...iv...
