background image

45

Alibi Camera Software User Manual

To delete an IP address you entered

Click (highlight) the IP address in the list that you want to delete, then click 

Delete

. To delete all IP address you entered, click 

Clear

To modify an IP address you entered

1.  Click (highlight) the IP address in the list that you want to modify, then click 

Modify

2.  In the pop-up window, edit the IP address as needed. 

3.  Click 

OK

 to save the new address.  

4.6  Events menus

4.6.1  Motion Detection

Normally, motion detection recording is performed by an NVR or VMS device that monitors the video stream from the camera and 
is configured to record when motion is sensed. However, for configurations where the camera is not monitored by an NVR or VMS, 
it can be configured to perform motion detection and write video segments, capture data and log data directly to an online storage 
device such as a NAS (Network Attached Storage). Use this menu to perform motion detection recording when the video segments 
and other data is saved to an online storage device. 

To open the Motion Detection menu, go to 

Setup 

tab

 | Event | Motion Detection

SECTION 4: CAMERA SETUP MENUS

Summary of Contents for ALI-IPU Series





































































Reviews: