25
Alibi Camera Software User Manual
4.2 Network menus
4.2.1 TCP/IP
TCP/IP settings must be properly configured before you operate the camera over network. The camera supports both the IPv4
and IPv6. Both versions may be configured simultaneously without conflicting to each other, and at least one IP version should be
configured.
Steps:
1. Open TCP/IP settings interface: Go to
Setup
tab
| Network | TCP/IP
2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6
Default Gateway, MTU settings and Multicast Address.
Notes
•
The valid value range of MTU is 500 ~ 1500.
•
Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream simultaneously by
requesting a copy from the multicast group address. Before using this function, you must enable the Multicast function of your
router.
3. Click
Save
. The camera must reboot for new settings to take effect.
SECTION 4: CAMERA SETUP MENUS
Summary of Contents for ALI-IPU Series
Page 4: ...iv...
