30
1. Check the
Enable IEEE 802.1X
box to enable the feature.
2. Configure the 802.1X settings, including EAPOL version, user name and password. The EAPOL version must be identical with
that of the router or the switch.
3. Enter the user name and password to access the server.
4. Click
Save
. A reboot is required for these settings to be in effect.
4.2.6 QoS
QoS (Quality of Service) can help solve network delay and network congestion problems by configuring the priority of sent data. To
open the QoS screen, go to
Setup
tab
| Network | QoS
To configure QoS:
1. Edit the DSCP fields for
Video/Audio DSCP
,
Event/Alarm DSCP
and
Management DSCP
. The valid value range of the
DSCP is 0-63. Larger DSCP values have higher priority.
NOTE
DSCP refers to the Differentiated Service Code Point. The DSCP value is used in the IP header to indicate the priority of the data.
SECTION 4: CAMERA SETUP MENUS
Summary of Contents for ALI-IPU Series
Page 4: ...iv...
