IN AN EMERGENCY
234
COURTESY MIRROR
LIGHT
(
fig. 43-44
)
To change the bulb, proceed as follows:
– Open the mirror cover (
A
).
– Remove the transparent cover (
B
) lev-
ering in the point shown by the arrow.
– Gently raise the bulb holder (
C
) from
its housing, remove the snap-fitted bulb
and change it.
– Put the bulb holder correctly (
C
) back
in its housing.
– Refit the transparent cover (
B
) insert-
ing it in its correct position firstly on one
end and then on the other until it clicks
into place.
fig. 43
A0A0179b
fig. 44
A0A0180b
GLOVEBOX LIGHT
(
fig. 45-46
)
To change the bulb, proceed as follows:
– Open the glovebox, then remove the
light unit (
A
) levering in the point shown
by the arrow.
– Open the protection (
B
) and change
the snap-fitted bulb.
– Close the protection (
B
) on the trans-
parent cover.
fig. 45
A0A0181b