IN AN EMERGENCY
229
– Replace the bulb;
– Refit the bulb holder turning counter-
clockwise and check that it is secured cor-
rectly;
– Refit the transparent.
SIDE DIRECTION INDICATORS
(
fig. 30
)
– Push the transparent cover towards
the rear of the car to compress the catch
(
A
). Release the front part and remove
this unit.
– Turn the bulb holder (
B
) counter-clock-
wise and remove it from the cover.
– Remove the snap-fitted bulb and
replace it.
– Insert the bulb holder (
B
) in the trans-
parent cover, then position the unit mak-
ing sure the catch clicks into place (
A
).
fig. 29
A0A0626b
fig. 30
A0A0166b
FRONT DIRECTION
INDICATORS
(
fig. 28-29
)
To change the bulb, proceed as follows:
– Using the screwdriver provided,
remove the transparent unit operating on
the two metal clips as shown in the figure;
– Turn the bulb holder clockwise (
A
)
and remove it;
– Remove the bulb (
B
) pushing gently
and turning counter-clockwise;
fig. 28
A0A0625b