GETTING TO KNOW YOUR CAR
20
– raise the headrest to the highest posi-
tion, press both buttons (
A-fig. 21
) at
the side of the two supports, then remove
the headrest pulling them upwards;
– move the seat belts to the side
extending them correctly without twisting;
– raise the levers (
A-fig. 22
) retain-
ing the back rests and tilt them forwards
to obtain a single loading surface
(
fig. 23
).
fig. 21
A0A0607b
fig. 23
A0A0608 b
Total extension
Proceed as follows:
– check that seat buckles of the side
belts are fitted in the respective pockets
on the back rest (
A-fig. 20
) and the tab
(
B
) of the centre abdominal belt is insert-
ed in the support (
C
).
– pull the handles in the centre of the
cushions, then tilt them forwards;
fig. 20
A0A0623b
fig. 22
A0A0608 b
IMPORTANT
For versions/markets
where applicable, the retainer levers are
replaced by buttons (one for each side).
To release the back rests and tilt them,
use the buttons themselves.