manualshive.com logo in svg

Alfa Laval MMPX 303SGP-11, Manual

Share
Download
Alfa Laval MMPX 303SGP-11 Manual Download Page 172

[email protected]

[email protected]
Movil:959440045

172

Lifting height for transport of bowl

Specification

A minimum height is required to lift the bowl, bowl 
parts and the bowl spindle, see the drawing 
‘‘8.6.2 Foundation plan” on page 157.

Recommendation

When two or more separators are installed, the 
lifting height may have to be increased to enable 
parts from one separator to be lifted and moved 
over an adjoining assembled separator.

Space for oil changing

Specification

The oil filling device must not be blocked by floor 
plate arrangement, etc.

Recommendation

It should be possible to place a portable collecting 
tray under the oil filling device drain hole.

8.7.3

Foundations

Specification

•

The separator should be installed at floor 
level, see ‘‘8.6.2 Foundation plan” on page 
157.

•

The separator must be installed on a strong 
and rigid foundation to reduce the influence of 
vibrations from adjacent machinery.

•

The foundation should be provided with a 
cofferdam.

NOTE

When lifting a separator it must always be 
hung securely. See the separate lifting 
instruction in this book.

www.fdm.com.pe

Summary of Contents for MMPX 303SGP-11






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands