[email protected]
Movil:959440045
122
6.6
Water tank
Remove the cover (5) with the drain pipes and the
water tank (1).
Note that the tank must be lowered past the
spindle end (A) before it can be withdrawn (B).
•
Check the tank interior and clean out if
necessary.
•
Check that the pipes are not defective.
Replace if necessary.
If the parts fitted on the cover have been
removed, it is necessary to fit the parts properly
together at assembly.
•
Seal the drain pipe and water inlet pipe with
Loctite 573.
•
Secure the screws with Loctite 242.
The drain pipe opening, (3), should be mounted
upwards.
A
B
1
2
3
4
(242)
(573)
(242)
5
6
7
G
0
47
43
21
1. Water
tank
2. O-ring
3.
Drain pipe opening (pointing upwards)
4. Drain
pipe
5. Cover
6. Elbow
coupling
7. Pipe
www.fdm.com.pe
Summary of Contents for MMPX 303SGP-11
