Alfa Laval AFPX 617XGV-14/74CG, Instruction Manual

Page: 88 / 154

3.4 Intermediate Service (IS), assembly 3 Dismantling/Assembly
88
8. Wipe off the spindle top and nave bore in the
bowl body. For rust protection, lubricate the
tapered end of the spindle with a few drops of
oil (no other lubricant shall be used). Spread
it over the surface carefully. Wipe off surplus
oil with a clean cloth.
9. Turn the bowl body using the turning tool.
Ensure the screws on the turning tool are
properly tightened.
10. Turn the bowl body and then remove the
turning tool.
NOTE
Too much oil on the surface between the
spindle and the bowl body, or if other
lubricant is used, will reduce the friction
between the two parts. This may result in a
relative rotation between the parts, which
can lead to seizure, scoring, and possible
welding.
WARNING
Crushing hazard
Risk for jamming injury when turning the
bowl body.
G
0
68
29
21
G
0
57
02
1
1
S
0
0
828
1
1