Alfa Laval AFPX 617XGV-14/74CG, Instruction Manual

Page: 56 / 154

3.2 Intermediate Service (IS), dismantling 3 Dismantling/Assembly
56
e. Release the pressure in the compressing
tool and remove it from the lifting tool.
4. Fit two eye bolts and remove the large lock
ring by a hoist.
5. Separate the bowl hood from the bowl body
by using the compression tool as described
below before lifting off the bowl hood.
a. Remove the lifting tool from the bowl
hood.
b. Fit the compressing tool by screwing the
pole of the tool into the threads of the
distributor using the horizontal handle.
The control lever on the compressing tool
should be in position 0.
c. Fit the lifting tool on the bowl hood.
d. Turn the control lever to position 2 for
expansion.
Separate the bowl hood from the bowl
body by pumping the horizontal handle.
NOTE
The lock ring must be kept lying horizontally
or it may become distorted. Even the
slightest distortion could make it impossible
to refit.
G
0
531
32
1
G
0
53
15
21
S
0
07
81
1
1
G
054
39
21
G
0
54
40
21