19/33
ALFA IN a.s. ©
www.alfain.eu
9. Confirm the measured value by pressing encoder
V5
, exit the menu by
pressing any button twice.
10.
Screw on the gas nozzle of the welding torch.
11.
Insert the welding wire.
QUICK JOB SELECTION - MEMORY
Works for all welding methods.
1. Long press (4s) of one of the
V4
buttons (1,2,3,4,5,6) will save the set
parameters to the memory.
2. JOBs are stored as active (they can be switched by remote control on the
torch).
3. A short press of one of the
V4
buttons (1,2,3,4,5,6) will retrieve the stored
parameters from memory.
4. If no JOB is stored for the desired position, the display will show
No Job
.
WELDING MODE 2T - TWO-STROKE
Works for both MIG/MAG welding methods.
Use the
V20
button to switch between the
2T
,
4T
and
modes.
If the
V17
light is on, the machine is set to two-stroke mode. The first stroke is
to press the torch button and keep it pressed, the machine will start the welding
process. The second stroke means to release the torch button, the machine
stops the welding process.
WELDING MODE 4T - FOUR STROKE
Works for both MIG/MAG welding methods.
Use the
V20
button to switch between
2T
,
4T
and
modes. If
the
V18
light is on, the machine is set to 4-stroke mode. The first stroke is to
press the torch button and keep it pressed, the machine will start the welding
process. The second stroke means to release the torch button, the machine
continues the welding process. The third stroke means to press the torch button,
the welding process continues. The fourth stroke means to release the torch
button, the machine stops the welding process.
WELDING MODE 2T - DOUBLE STAIRS
Works for both MIG/MAG welding methods (only in SYN mode).
Press the
V20
button to switch between the
2T
,
4T
and
modes. If the
V17
and
V19
lights are on, the machine is set to two-stroke stair
mode. The first stroke means to press the torch button and keep it pressed, the
machine will start welding with the starting current
SCu
for the starting current
t