Alfa IN SVAROG 320 HD PULSE MODULAR, Operating Manual, Page: 10 / 33

10/33
ALFA IN a.s. © www.alfain.eu
A4 Coolant reservoir
A5 Quick connector H2O (depends on machine variant)
A6 Quick connector H2O (depends on machine variant)
A7 Quick connector (+)
A8 Quick connector (-)
A9 Gas bottle holder
A10 Coolant filter
A11 Butterfly lock
A12 Main switch
A13 Mains cable
A14 Gas connection connector
A15 Connector for CU and generator connection
A16 Crane eyes
A17 Coolant drain hole
A18 Wire feeder
A19
Button: wire guide
A20 Wire spool holder
 Please note 
If the machine is supplied only in the version without chassis, wear-resistant
insulating rails are used as a base.
Separation of the generator from the CU
To separate the generator part from the cooling unit, it is necessary to loosen
the five butterfly nuts
A11 and disconnect the connector A15 (electrical
connection between the CU and the generator). The generator can then be
easily manipulated.
WIRE FEED MECHANISM
Figure 2 - Four-fold scroll
Item. Description
E1 Pressure arm nut
E2 Pressure arm
E3 Bovden boot
E4 EURO connector
E5 Pulley