3/35
ALFA IN a.s. ©
www.alfain.eu
1. INTRODUCTION
Dear consumer,
Company ALFA IN a.s. thanks you for buying our product and believe that
you will be satisfied with our machine.
Welding machine may be operated only by trained persons and only in the
technical provisions. Company ALFA IN a.s. accept no responsibility for
damage caused by improper use. Before commissioning please read
carefully this manual
.
The machine complies with the appropriate CE mark.
For maintenance and repairs, use only original spare parts. There is of course
a complex of our services.
Welding machine
aXe 320 double pulse
is designed for MIG / MAG
continuous and pulse, MMA and gouging. By the machine
aXe 320 double
pulse
you can weld different types of connections (butt, single-sided, double-
sided, fillet, lap, etc.) using wire from diameter 0.8 to 1.2 respectively to 1.6
mm of different metals and alloys (carbon and alloy steels, aluminum alloys,
etc.). They are designed primarily to medium and large industrial facilities
where are high demands on ease of use, reliability and productivity with
prolonged use.
Welding machines
aXe 320 double pulse
are available in:
1. aXe 320 double pulse COMPACT (Gas or H2O, HIGHT SPEED
option) compact welding machine and the option of a water cooled
torch
2. SAFETY PRECAUTIONS
1. Use and maintenance of welding and cutting machines can be
dangerous. Please draw user´s attention to follow the safety precau-
tions to avoid injuries. Welding and cutting machines must be used
appropriate and only by specialist staff. Please inform yourself
constantly about the valid safety precautions and regulations of
accident prevention by working with this machine*.
2. Remove all flammable material from the welding area for fire prevention
before welding.
3. Do not weld at containers which were filled up before with flammable
materials (fuel).
4. All inflammable material in the welding area which could be inflamed by
sparks must be removed.
5. Check after welding the place conforming UVV.
6. Do not expose the unit to rain, steam and do not spray water in it.