20/35
ALFA IN a.s. ©
www.alfain.eu
This action will automatically close the menu.
NAMING JOBS
JOBS can be named and renamed (maximum 9 characters) in the JOB
menu, LOAD, or SAVE.
This function is available when welding mode is not active.
P29
Press the button.
The job menu appears in the following displays: P25
P2 P1
Use these buttons to select the following parameter: OPT
The selected parameter is shown by the following symbol:
P28
Use the encoder to select the following setting:
LOAD / SAVE
P2 P1
Use these buttons to select the following parameter: JOB
P28
Use the encoder to select the position of the job to be
renamed.
P29
Hold down the button for 3 seconds.
The first letter of the name blinks.
P28
Use the encoder to change the letter.
P29
Press the button to confirm.
P2 P1
Use these buttons to select the character to be modified.
Exit without confirmation
P3
Press the button.
Return to the job menu.
P3
Press the button.
Exit with confirmation
P29
Hold down the button for 3 seconds.
Return to the job menu.
P29
Press the button.