11/35
ALFA IN a.s. ©
www.alfain.eu
D1
Spool Holder
D2
Nut Spool Holder
D3
Adapter
Picture 6 – Wire feed 4-roller
E1
Fixing shaft
E2
Pressure arm
E3
Liner- Feeder
E4
EURO connector
E5
Roll
Picture 7 – Roller impact on the welding wire
GAS FLOW
1. Place the gas cylinder on the platform and fix it properly by the fixing
chain. We recommend using bolts and nuts to fix it more safely.
2. Connect the pressure reduction valve on the gas cylinder.
3. Connect the gas hose to gas outlet
F8
on the valve and the gas inlet
F9
on the machine
4. Open the
F2
cylinder valve
5. Press the button Gas test
T23
for more then 4 s
6. Adjust the amount of gas on the reduction gas valve (it is not a part of
the welding machine) by the
F7
adjusting screw