Alfa IN aXe 320 double pulse, Operating Manual, Page: 22 / 35

22/35
ALFA IN a.s. © www.alfain.eu
DELETING A JOB
This function is available when welding mode is not active.
P29 Press the button.
The job menu appears in the following displays: P25
P2 P1 Use these buttons to select the following parameter: OPT
The selected parameter is shown by the following symbol:
P28 Use the encoder to select the following setting: DELETE
P2 P1 Use these buttons to select the following parameter: JOB
The JOB displayed is the one that was most recently used.
When there are no saved jobs the following message
appears on the bottom line: NO JOB
P28 Use the encoder to select one of the existing jobs.
Exit without confirmation
P3 Press the button.
This action will automatically close the menu.
Exit with confirmation
P29 Press the button.
CONFIRM JOB
ERASURE
The message appears on
the following displays: P25
P28 Use the encoder to select the following setting: NO
P29 Press the button.
This action will automatically close the menu.
Exit with confirmation
P28 Use the encoder to select the following setting: YES
P29 Press the button.
This action will automatically close the menu.