. .
24
PROGRAMMING
Exit:
Turn the ignition switch to the
ON
position, or wait for 15 seconds.
3 long chirps
and
3 parking light flashes
will confirm programming is
exited.
Active Arming With Passive Starter Disables
: The Ground-when-armed
output will become active 60 seconds after the ignition is turned
OFF
.
The LED will flash at half its normal rate when the ignition is turned
OFF
to indicate that the system will interrupt the Starter/Crank wire in 60 seconds.
45 seconds Delay Door Ajar Warning:
This feature controls the error chirp that is generated if the system is armed
with the door trigger active. This is useful in a vehicle that has a Delayed
Dome Light after the door has been closed. If the system is armed before
the dome light has turned off, the security system will generate the door
trigger error chirp. Use this feature to disable the door open error chirp.
ALARM FEATURE #2 PRORAMMING:
1.
Turn the Ignition switch
ON and OFF
3 times
, leave it in the
OFF
position.
2.
Press the
valet/program switch
4 times
and hold the
4
th
press, hold
it in until
2
chirps
followed with
1 long chirp
is heard, then release the
valet/program switch
. You are now in the
ALARM FEATURE #2
PROGRAMMING MODE.
3.
Press and release the transmitter button that corresponds to the feature
you desire to program.
ALARM FEATURE #1 PROGRAMMING CHART
One Chirp with
Press
One LED Pulse
Transmitter Factory Default
Two Chirps with
Three Chirps with Four Chirps with
Button
Setting
Two LED Pulses
Three LED Pulses Four LED Pulses
4
45 second
Instant Door
delay Door Ajar Ajar Warning
Warning
5 +
Panic with
Panic with
Panic with
Without Panic
Ignition
Ignition
Ignition
function
on and off
on and off
on and off.
Panic with no
time limit
6 +
Without Car-
Active Car-
Passive Car-
jack mode
jack mode
jack mode
Summary of Contents for 650R
Page 1: ......
Page 7: ...7 INSTALLATION DIAGRAM Violet Wire Loop Selector for automatic or manual transmission...
Page 43: ......
